There’s nothing more rewarding than walking into a kitchen or bathroom with sparkling, clean tiles that smell fresh. While soap does a good job at cleaning your tiles, Murphy Oil does an even better job. To clean your tiles, apply water, rubbing alcohol, oil soap, and baking soda to a cloth. Get scrubbing and then finish it off with a mop. Murphy’s Oil won’t wear down the grout or tile and is safe to use. The rubbing alcohol will get rid of mildew (Murphy Oil Soap).
If you have a spray mop, you know it can get costly to keep replacing the solution, even if you’re not using it every day. Instead of heading to the store and buying the same answer, grab your bottle of Murphy Oil and use that instead. It’ll save you money and it’s just as effective, if not more, than the regular solution. To make the solution, add two tablespoons of Murphy’s Oil soap to water and stir. Use a funnel to pour the answer into your Swiffer Jet, or dip the bottom into the solution. Remember, Murphy Oil is not for real hardwood floors. (Curbly).
If you have wood banisters in your home, you likely put them there as a focal point. They’re the first thing people’s eyes look to, so it’s important to keep them shining and clean. Over time, though, it’s likely they’ll get dirty and nasty, especially if you have little kids that like to touch the banisters. Murphy’s Oil will remove the grime and make it shine as if it’s brand new. As long as your railing isn’t finished wood and is waxed, then it’s safe to use Murphys Oil. The more you stay on top of cleaning it, the better it’ll shine. Use a drizzle of Murphy’s Oil on the edge of a sponge and rub it all over the wood in small circles to clean (Savoring the Good).
As we’ve mentioned, Murphy’s Oil is safe to use on leather, which is good news for those of you with leather chairs in your living room or leather clothes. Not only will using Murphy’s Oil removes the need to go out and purchase harsh, expensive chemicals to clean your home, but you won’t have any of those strong odors that linger after using harsh chemicals. First, wipe off any visible dirt from your leather furniture with a rag, and then add Murphy Oil and water to the edge of the rag. Wipe away the dirt. It’s important to only moisten the furniture and not dampen it and only do small sections at a time to make sure you don’t damage your leather (Toms Leather Cleaning).
By combining baking soda and Murphy’s Oil soap, you can get those hard-to-clean areas of your home and make them shine. The baking soda will give you the extra scrubbing power and elbow grease you need to get that extra shine in. To do this properly, use two-thirds of a cup of baking soda and four tablespoons of Murphy’s Oil soap. Mix it until it resembles frosting, and once you’re happy with the consistency, you’re good to go (The Make Your Zone).
When you’re cleaning your painted walls, you need to be especially careful not to chip the paint or create more smudges. If you have little kids or pets running around your house, you likely have at least one smudge or stain on your walls. To make your home look cleaner, use water and Murphy Oil to safely and gently remove stains on your painted walls. Mix the combination around a few times, soak the cloth, and then squeeze it to remove any excess water (Quora).
It’s important to keep your garden tools clean, to give them a long shelf life. In the summertime, periodically clean your garden tools to remove dirt, sludge, and germs. And at the end of the summer, before you store them for the long winter, give them another scrub with water and Murphy’s oil. It’s an easy DIY solution to keeping your garden tools in shape (Calling It Home).
All parents know about the dreaded marker stain, whether it ends up on your wall, your floor, or your furniture. There’s nothing worse than finding a permanent marker stain in a place it shouldn’t be. Whiteboards suffer the most, and most of the time, that marker doesn’t stay on the whiteboard. You can remove marker stains on whiteboards and your wall using a combination of Murphy Oil and water. Use a cloth to blot the stain. As you blot, the marker will transfer to the cloth and remove it from the surface, whether it’s a wall, clothing, or furniture (How to Clean Stuff).
To remove pesky carpet stains from large areas, or to simply keep your carpet free from stains, add Murphy’s soap oil to your vacuum. If it’s in a small spot, you can add a small amount of Murphy’s oil as a spot-clean using a small cloth. Let the solution sit on the stain for at least thirty minutes to work its magic and penetrate the fibers. To disperse the solution, scrub the soap in a circular motion. When it’s finished, you can vacuum up the solution, or simply remove it with water and a clean cloth (Hunker).
Our car’s wheels pick up the most dirt and grime while driving. Over time, this builds up. It’s important to stay on top of cleaning your car to keep it in the best shape possible. You don’t have to take it to the car wash, you can simply apply a mixture of Murphy’s Oil soap and water and use it to dab your car wheels and hubs. It’s safe to use, easy, and a much more cost-effective solution. The most effective way to clean is to remove your car wheels from the car, spray them down, and scrub them (YouTube).
Stainless steel sinks suffer the most. We’re constantly dumping dirty plates and used forks into them. Grease, old food, and dirt build-up, especially after heavy use. To properly clean your sink, wash away the grease with water, and then pour Murphy Oil all over your sink and scrub. You’ll end up with a beautiful, shining sink that looks as good as new. Say goodbye to bacon grease and butter! Be careful of pouring a lot of it down your drain so it doesn’t clog your pipes (Helpful Horse Hints).
Instead of going to the store and buying cleaning wipes, you can easily make your own. All you have to do is combine one cup of white vinegar, a tablespoon of baking soda, and one and a half tablespoons of Murphy Oil. Combine it all in two cups of warm water, and then soak microfiber towels in the solution. This solution will last a long time and is safer and more effective to use than the chemical wipes you buy at the store (Pinterest).
As we’ve mentioned, you can use Murphy’s Oil Soap to clean your wooden cabinets. It’ll add a beautiful shine to the exterior and interior of your wooden kitchen or bathroom cabinets. Because cabinets are one of the parts of your home that get the least amount of attention, they’re usually the dirtiest. Wood cleaners are expensive. Murphy’s Oil does the job just as effectively and for a way better price. Make use of that oil soap! It gets deep into the grime of dirt and sludge (Murphys Oil Soap).
Even though it’s more cost-effective in the long run to install traditional wood flooring in your home, you might opt for laminate floors. To keep them in tip-top shape and prevent them from cracking and popping, apply the soap to your floor as you would with any cleaner. It takes less than a day for the oil to be effective and stop your floors from squeaking. To prevent leaving any streaks, apply it with mopping and the damp-dry method. It won’t dull or damage your floors, either (Yodeon Decor).
There’s nothing worse than fixtures that look cheap, dull, or dirty. This will affect the rest of your home and make your living room seem unkempt. To keep your fixtures shining, apply soap oil to restore their luster and shine (The Dollar Stretcher).
To make an organic pesticide that’s easy to use, you need to get creative. That’s where Murphy’s Oil comes in. You can make an inexpensive, organic oil with Murphy’s Oil to reduce and limit the number of pests around your home. Use a cup of vegetable oil with a quarter cup of Murphy’s Oil soap. Put it into a spray bottle with water, shake it, and spray it around your home and outside in your garden and plants to prevent pesky pests from coming inside. They’ll get stuck in the oil and eventually die. Even though it’s unfortunate, it’ll keep you and your family safe and healthy. It’s time to enjoy your garden (Dining With Debbie).
Keeping your jewelry in top condition can get expensive and time-consuming. It’s important to keep them clean to make them last as long as possible. That’s where Murphy’s Oil comes in. If you mix one cup of soap with one liter of super-hot water, it’ll make your jewelry shine. To clean your jewelry, you can apply the soap using a small brush and paint the tiny crevices and hard-to-reach places. Before you let your jewelry dry, remove the soap (The Fun Times Guide).
As we’ve mentioned, you can use Murphy Oil to clean your appliances, sinks, and floors. That means you can use it to clean your entire bathroom. All you need is a cloth, soap, and Murphy’s oil. You can pour the oil into your bathtub and scrub the surfaces. When you’re finished, rinse it off with oil. It’ll cover all the bases! Or, pour a mixture of water and Murphy’s Oil into a spray bottle and use that to clean your bathroom.